Plavix Generic For Sale, Plavix Dosage Questions

it's the ./setup binary that seems to throw an exception. it is quite possible that illegal instruction comes from the fact that our binary is incampatible with a "duron" processor...

who makes that processor? do you know what compile flags are usually used when compiling for such a processor. (our zs4 linux executables use the following compile flags. 686 here and pentium4 here. would those be incompatible with your processor?

hmmmm...might be the -march=processor directive to gcc that causes the grief. must i use -mcpu instead?

well, i just started a new build so i can provide you with a version that hopefully runs on your AMD. the RAM (256M) is sparse. the software might run slow, but should run... :)

well, here it is. if this works for you, that would mean that all future versions (starting with v0.936) will be capable of running on alll 386 compatible processors (we hope). so please tell us if the install worked. shanx.

The Duron processor is made by AMD.  I've been using the "i386" versions of Linux software in the past and haven't had any processor incompatibilities so far.  I'll give your new version a try and report back...

BTW, I got 8 email notifications for this forum thread (?).

Still didn't work.  Here's the last few lines from the terminal after launching the executive file:

99.00%: no launcher object specified
99.00%: cd "/home/bigkahuna/tmp/t@b/2836700/".
99.00%: launching "/home/bigkahuna/tmp/t@b/2836700/INSTALL.sh".
ref_gui.Construct(guifltk) failure

So I tried launching INSTALL.sh from it's directory and got:

bigkahuna@vaio:~/tmp/t@b/2836700$ bash INSTALL.sh
chmod: cannot access `*.so': No such file or directory
chmod: cannot access `./setup': No such file or directory
INSTALL.sh: line 14: ./setup: No such file or directory

And here is the contents of the directory:

INSTALL.sh        desktop_nlite.so   kernel.so            skin               the.t@bsetup
LICENSE           document_dig.so    lgpl.txt             tabaudio.so        zs_snow.jpg
README            document_gnome.so  libtiff-copying.txt  tabaudio_linux.so  zweistein
banana.png        document_mp3.so    mmeditor.so          tabjpg-notice.txt  zweistein.desktop
c                 font               mmvpatt.so           tabpix.so          zweistein.png
cmd.so            fontpig.so         ogg-notice.txt       tabres.so          zweitree.jpg
desktop.so        gadclsview.so      png-about.txt        tabtiff.so
desktop_gnome.so  grafix.so          setup                tabvidig.so
desktop_icewm.so  guifltk.so         setup.desktop        tabzs4.jpg
desktop_kde.so    http.so            showaudio.so         tcpip.so

Hope this helps...

looks like it fails ont the fltk (fast light toolkit). it may be that you have to install libfltk on your system, it from the folks at http://www.fltk.org/ .

Our (latest) SUSE system came with it (libfltk) installed and we did not bother shipping it with our linux install, assuming everybody had that library...

I believe I do have it installed.  I just did a "locate libfltk" and got this:

bigkahuna@vaio:~$ locate libfltk
/usr/lib/libfltk.so.1.1
/usr/lib/libfltk_forms.so.1.1
/usr/lib/libfltk_gl.so.1.1
/usr/lib/libfltk_images.so.1.1
/usr/share/doc/libfltk1.1c102
/usr/share/doc/libfltk1.1c102/changelog.Debian.gz
/usr/share/doc/libfltk1.1c102/changelog.gz
/usr/share/doc/libfltk1.1c102/copyright
/usr/share/doc/libfltk1.1c102/CREDITS
/usr/share/doc/libfltk1.1c102/README.gz
/var/lib/dpkg/info/libfltk1.1c102.list
/var/lib/dpkg/info/libfltk1.1c102.md5sums
/var/lib/dpkg/info/libfltk1.1c102.postinst
/var/lib/dpkg/info/libfltk1.1c102.postrm
/var/lib/dpkg/info/libfltk1.1c102.shlibs

I just checked, I've got libfltk 1.1.6-2 (latest is 1.1.6-5) installed.  I've got the shared libraries, but not the "development files".

well, since i forgot this last time: thanks a lot for helping toget the AMD issue fixed. i assume that it is fixed because you now have a new problem (libfltk)

 i cannot offhand think of anny reason why libfltk would not initialize ( other than x is not running ), it depends only on the most common stuff (libX11, libpng, libjpeg) the devel version of libfltk is certainly not neccessary for running zs4-linux.

however, i will make one more attempt at making certain that our guifltk module is capable of running anywhere... gimme an hour or two, and i'll at least tell ya how it went...

i've tar'ed upv zsrundir.tar.gz this file contains a zs4 script whould runs from konqueror or the command line. this attempt still has nuttin to offer for the guifltk issue, but it bypasses the installation procedure....

ie: unpack and run the "zs4" file contained in the zsrundir/ directory...

hope for the best,
countinn

Forgive me for asking, but how do I install this?

bash INSTALL.sh
bash setup.sh
or just "setup" ??

I extracted the /zsrundir to my home directory and tried all three.  All gave file missing errors?

sorry, i forgot to delete install/setup files, those are not needed. simply run ./zs4 i'm not that optimistic though, since i still expect guifltk trubble...

> simply run ./zs4

I'm still not sure I follow you.  There is no zs4 executable.

There is a zs4 bash script, if I launch that I get
~/zsrundir$ bash zs4
zs4: line 6: ./zweistein: No such file or directory

There is also a zweistein executable, if I launch that I get:
~/zsrundir$ zweistein
zweistein: error while loading shared libraries: kernel.so: cannot open shared object file: No such file or directory

These errors indicate that either I'm putting the folder ./zsrundir in the wrong location or that something is missing.

what the script is trying to do is

>> cd directory_containing_zs4
>> export LD_LIBRARY_PATH=.:${LD_LIBRARY_PATH}
>> ./zweistein

the main objective here is to add the current directory (.)
to the library path before calling the zweistein binary.

i've tried running the script manually using the "bash"
command and the "sh" command, and got the same result as
you did.

when i said to simply run "./zs4", this implies that the
script zs4 should be run from the current directory. if
the executable flag is set, then one must type

./zs4

and nothing else into the console window/screen. it seems
to be a quirkyness of linux that you must start executables
in the current directory by typying ./ ahead of them.

the first line of the script (#! /bin/sh) tells the system
which command interpreter to use for executing the file. so
u shouldn't have to run the script as an argument of either
the "bash" nor the "sh" command.

in essence, one treats shell scripts exactly like binaries,
possibly doing a

chmod 755 zs4

to give it execution permission, but then you simply type

./zs4

Ok, tried it and this is what happened:

~/zsrundir$ ./zs4
ref_gui.Construct(guifltk) failure

Hello,
<>> Ok, tried it and this is what happened:
> ~/zsrundir$ ./zs4
> ref_gui.Construct(guifltk) failure

Just to say that I have the exact same error message, whether using the normal installer or directly calling zs4 or even ./zweistein from the zsrundir tar.gz distrib. (I have setup the LD_LIBRARY_PATH correctly).

I am running debian sarge with libfltk1.1c102 1.1.6-5 and libfltk1.1-dev 1.1.6-5 installed.

Here is the output of ldd ./zweistein:
                libpthread.so.0 => /lib/tls/libpthread.so.0 (0x40019000)
        libdl.so.2 => /lib/tls/libdl.so.2 (0x40028000)
        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x4002b000)
        kernel.so => /root/tmp/t@b/zsrundir/kernel.so (0x400e5000)
        grafix.so => /root/tmp/t@b/zsrundir/grafix.so (0x4019a000)
        cmd.so => /root/tmp/t@b/zsrundir/cmd.so (0x402ba000)
        tabaudio.so => /root/tmp/t@b/zsrundir/tabaudio.so (0x402c2000)
        showaudio.so => /root/tmp/t@b/zsrundir/showaudio.so (0x402e3000)
        tabres.so => /root/tmp/t@b/zsrundir/tabres.so (0x40331000)
        mmeditor.so => /root/tmp/t@b/zsrundir/mmeditor.so (0x4033f000)
        tabpix.so => /root/tmp/t@b/zsrundir/tabpix.so (0x4049a000)
        tcpip.so => /root/tmp/t@b/zsrundir/tcpip.so (0x405b5000)
        http.so => /root/tmp/t@b/zsrundir/http.so (0x405bd000)
        document_dig.so => /root/tmp/t@b/zsrundir/document_dig.so (0x405c4000)
        gadclsview.so => /root/tmp/t@b/zsrundir/gadclsview.so (0x405d0000)
        libc.so.6 => /lib/tls/libc.so.6 (0x405e6000)
        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
        libm.so.6 => /lib/tls/libm.so.6 (0x4071b000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x4073d000)
        libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x40747000)
        libvorbisfile.so.3 => /usr/lib/libvorbisfile.so.3 (0x4080e000)
        libogg.so.0 => /usr/lib/libogg.so.0 (0x40816000)
        libvorbis.so.0 => /usr/lib/libvorbis.so.0 (0x4081b000)

Could we get the sources so that we can configure and compile it ourselves ? It would certainly solve the fktk issue..

Thanks for your help.
Cheers,
Christophe.

 = In the force if so strong Yoda is, with words in the proper order =
 = a sentence construct then why cannot he?    --anonymous           =

this one, http://devel.zs4.net/zs4_linux.tar.gz , has many dependencies removed and hopefully works on debian installations.

this version is an installer again, since in debian tests sofar, the installer and the actual "zsrundir" variant failed due to the same error, this should make no difference.

should this fail to run, then i will consider other variants, including a plain X11 driver.

this installer will unpack itself to ~/t@b/3147246/, cd into that dir and run ./INSTALL.sh

the driver (plugin) which fails in the above cases is called guifltk.so and should only depend on a few very basic libraries at this point.

about the source code: we are currently refraining from publishing/sharing at this time due to many unsolved (mostly financial) issues.

That fixed it!  I only played with it for a minute or two, but so far everything seems to be fully functional.

Heads up to anyone else, you need to launch the app by running the shell script.

I really like what you've done with the gui, easily the nicest gui on a Linux video editor, can't wait to actually use it.

Thanks!

Hello,

> this one, http://devel.zs4.net/zs4_linux.tar.gz , has
> many dependencies removed and hopefully works on
> debian installations.

The installer works this time and uncompress files into
$HOME/t@b/

> cd into that dir and run ./INSTALL.sh

However, this one gives an error message:

    Unable to load "the.t@bsetup"

If I try to run zweistein.sh directly it seems
to work however. Maybe I can skip the INSTALL.sh
step (?) and try to use the tool directly..

Thanks a lot for your efforts anyway.

Cheers,
Christophe.

 = The future is here, it's just not widely distributed yet. --William Gibson =

thanks for checking this out! these changes will end up in the official v0.938.

about the installer: i meant that it will automatically cd into the tmp folder and run INSTALL.sh. there's no need for you to do that. the software will always install to ~/t@b/....


furthermore the installer should have provided you with a desktop icon for launching the software (a strawberry from outer space) under following desktops: KDE, Gnome, ICEWm and Enlightenment.

once again, thanks for helping to get this software to install/run under debian linux, both of you.

The installer did install a desktop icon (KDE), I just didn't see it since I was running everything from a shell.

The application seems to work OK, only thing I noticed is that you are using custom cursors, and on my system -both- the standard arrow cursor and your "pencil" cursor are appearing.

ZS has sure grown up since I first tried the Windows version last year.  I'm looking forward to using it!

BTW, what are the chances that you'll add Photoshop/Premiere plug in support?

Thanks!

If the INSTALL.sh has been ran already, then
everything went fine for me. I can launch the
app and I guess I just have to learn using it
now.. ;-) . I didn't have an icon as I'm using
WindowMaker (wonderful Linux diversity.. :-) )
but it's no problem. It's nice for gnome/KDE users
to have one anyway.
Thanks a lot for all your help regarding the
installation

Cheers,
Christophe.

 = "Money has nothing to do with the results. Money =
 =  kills creativity. You can do it without money,  =
 =  you should just think how"  --John Cassavettes. =